Energy-efficient glass package (with three panes)
UW=1.1 W/m2K with standard connections A wide range of accessories is available for windows and a range of additional equipment.
1 — the lower part of the connection with a 165 mm long "apron"
2 — the upper part of the connection
3 — side parts and foam seals
4 — drain
5 — aluminum clamps for securing the connection
6 — profile suitable for roofing
Wooden window with transparent varnish High-quality service in all weather conditions Built-in ventilation Dust and insect filter Position for easy window cleaning Fasteners for installation of blinds Additional sealing rubber for improved tightness Improved glass package, window energy efficiency - Uw 1,3
The windows are intended for installation in roofs with a slope of 25° to 65°.
When opening the window sash from 0° to 45°, it is fixed in any position within these limits. The only windows on the market that, when installed in roofs with a slope of 39° to 43°, meet the requirements of DIN 5034-1, which stipulates that the lower edge of the window should be at a height of 95 cm from the floor, and the upper edge at least 220 cm above the floor.
With the handle located in the lower part of the sash, it is convenient to open skylights built in higher. The handle’s different fixation positions provide two micro-ventilation modes.
In order to easily wash the outer glass, the sash is turned by 160° and fixed with the help of a latch.
TopSafe system – increased security against burglary.
A wide range of accessories and additional equipment is available for windows.
The Fakro EZV-A connection consists of four basic elements (lower, two side elements and an upper element). Its lower part has an adhesive coating that ensures a secure connection of the window to the roof covering. Connection side channels provide protection against rain, snow, wind-blown dust and leaves. It also includes gutters that allow condensation to drain from the window.
1 — the upper part of the connection with insulation 2 — the lower part of the connection with insulation and an apron 3 — side parts and foam gaskets 4 — drain 5 — aluminum clamps for fixing the connection 6 — profile corresponding to the roof covering
We, K INDUSTRY, are a small but enthusiastic, precise and professional team with many years of experience in the trade of VELUX, FAKRO, OKPOL, ROTO and SKYLIGHT roof windows. We are the official dealers who offer delivery and installation of all wide skylights and their accessories.
We offer to get acquainted with the latest trends in the design of roof windows and accessories and to buy the latest products from the leading window manufacturer in the world, VELUX. It will be convenient and safe for you to shop in our store, because we do not ask for personal codes and bank card numbers. This is an offline online store, we will send you a post-paid invoice after placing the order. Flexible discount system.
The more natural daylight the house has, the better. You can never have too many windows in a house. Skylights can be installed individually or in window blocks. The result is excellent. When choosing the number of windows and their sizes, we recommend following a simple calculation: in rooms where residents spend most of the day, the ratio of glazing area to floor area should be 15%, while in rooms that are used less during the day, such as bedrooms, the glazing area can be 10 % of the floor area. It is important to remember that the distance between the rafters must be 6 cm greater (3 cm on each side) than the width of the window for the correct installation of skylights. If horizontal gaps are required in the construction, the distance between gaps should be determined taking into account the width of the column finish.
All skylights must be installed with a mounting connection. It is made to suit all roof coverings and provides a watertight seal between the VELUX roof window and the roofing material.
The most popular types of connection are suitable for most roof coverings. The type of connection must be chosen depending on the height of the roofing profile